reducer哪家好-圣霖国际【诚实守信】

在输出轴上安装传动件时，不允许用锤子敲击，通常利用装配夹具和轴端的内螺纹，用螺栓将传动件压入，否则有可能造成减速机内部零件的损坏。

When driving parts are installed on the output shaft， it is not allowed to knock with hammers. Usually use assembly jig and inner thread of shaft end to press the tran***ission parts into bolts with bolts， otherwise， it may cause damage to internal parts of reducer.

当选用斜齿轮减速机时有以下几点需要注意：

允许输入轴径：减速机的输入轴孔与电机输出轴一般是通过一个厚度可以变化的套环来连接的。当不加套环时减速机输入轴孔为高值。

When choosing a helical gear reducer，reducer哪家好， there are several points to be paid attention to:

Allowable diameter

The input shaft of the reducer and the output shaft of the motor are generally connected by a sleeve that can be changed by a thickness. The input shaft hole of the reducer is the maximum when the ring is not added.

减速机内部齿轮变位系数选择 正确合理选择变位系数，不但可以凑合中心距，避免齿轮根切，保证满足同心条件，改善齿轮的传动性能和提高其承载能力及提高齿轮的使用寿命，还可以有效控制 侧隙、温升与噪声。

The change coefficient of gear displacement coefficient in the reducer is selected correctly and reasonably. It can not only make the center distance，reducer厂家， ***oid the gear cutting，阜新reducer， meet the conditi***， improve the tran***ission performance of the gear and improve its bearing capacity and improve the service life of the gear， but also can effectively the side gap， temperature rise and noise.