紧固件报价-紧固件-圣霖国际【客户至上】

凸模刃口端部修出斜面或弧形。这是减缓冲裁力的有效方法。减缓冲裁力，即可减轻对凹模侧材料的拉伸力，紧固件，从而达到***冲压件产生翻料、扭曲的效果。

The end of the punch is repaired with a bevel or arc. This an effective way to slow down the blanking force. By reducing the force of buffer， the tensile force of the side material of the die can be reduced，紧固件价格， so that the stamping and twisting effect can be suppressed.

槽钢的锯削：槽钢的锯削与扁钢一样，但是要分二次从宽边面往下锯，不能在一个面上往下锯，紧固件报价，应尽量做到在长的锯缝口上起锯，因此工件必须多次改变夹持的位置。

Channel steel sawing: the channel sawing of the channel steel is the same as that of the flat steel， but it must be sawed down two times from the wide side， and can not be sawed down on one surface， and should be sawed on the long saw mouth as far as so the of the clamping must be changed many times.

将闭合的模具放置于雎力机工作台或垫板上适当位置，如果使用气垫，先要放好顶杆，并标记好模具的摆放位置。

手动扳动冲压机床飞轮（或操纵点动按钮），紧固件哪家好，使机床上滑块下行并停于下死点位置。

Place the closed mould on the bench or pad of the mandrel machine. If the air cushion is used， the ejector pin should be placed first and the placement of the mould should be marked.

Manually pull the flywheel of the stamping machine (or the moving button)， so that the slider on the machine tool will be downhill and stop at the bottom dead center.

紧固件报价-紧固件-圣霖国际【客户至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）坚持“以人为本”的企业理念，拥有一支技术过硬的员工***，力求提供好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。圣霖国际——您可信赖的朋友，公司地址：辽宁省鞍山市高新区越岭路256号（研发中心A座2号楼510室至511室），联系人：王秋。