圣霖板材购买值得信赖 圣霖国际精益求精

弯曲度：工字钢高度小于或等于400MM时，每米弯曲度不得大于1.5MM，总弯曲度不得大于总长度的0.15%。高度大于400MM时，每米弯曲度不得大于1.0MM，总弯曲度不得大于总长度的0.1%。

Bending degree: when the height of the I-steel is less than or equal to 400MM, the bending degree of each meter must not be more than 1.5MM, and the total bending degree should not be more than 0.15% of the total length. When the height is greater than 400MM, the bending degree of each meter must not be more than 1.0MM, and the total bending degree should not be more than 0.1% of the total length.

槽钢分普通槽钢和轻型槽钢。热轧普通槽钢的规格为5-40#。经供需双方协议供应的热轧变通槽钢规格为6.5-30#。槽钢主要用于建筑结构、车辆制造、其它工业结构和固定盘柜等，槽钢还常常和工字钢配合使用。

Channel steel is divided into ordinary channel steel and light channel steel. The specification of hot rolled ordinary channel steel is 5-40#. The specification of hot rolled and variable channel steel supplied by both suppliers and suppliers is 6.5-30#. Channel steel is mainly used in building structure, vehicle manufacturing, other industrial structure and fixed disk cabinet, and channel steel is often used in conjunction with I-steel.

胶合板是由三层或多层一毫米左右的实木单板或薄板胶贴热压制成，常见的有三夹板、五夹板、九夹板和十二夹板（俗称三合板，五厘板，九厘板，十二厘板）。

Plywood is made of three or more than one millimeter of solid wood veneer or thin plate with hot pressing. There are three splints, five splints, nine splints and twelve splints (commonly known as three plywood, five millimeter, nine millimeter, twelve millimeter).