圣霖国际【开拓创新】(图)-减速机工厂-减速机

安装前，将电机输入轴、***凸台及减速机连接部位的防锈油用或锌钠水擦拭净。其目的是保证连接的紧密性及运转的灵活性，并且防止不必要的磨损。

Before installation， the anti rust oil of the motor input shaft，减速机厂家， the itioning protruding platform and the connecting part of the reducer is cleaned with gasoline or zinc sodium water. The pure is to ensure the tightness of the connection and the flexibility of the operation， and to prevent unnecessary wear.

减速器的种类繁多，减速机，按照传动类型可分为齿轮减速器、蜗杆减速器和行星齿轮减速器；按照传动级数不同可分为单级和多级减速器；按照齿轮形状可分为圆柱齿轮减速器、圆锥齿轮减速器和圆锥－圆柱齿轮减速器；按照传动的布置形式又可分为展开式、分流式和同轴式减速器。

There are many types of reducer according to tran***ission type can be divided into gear reducer， worm reducer and planetary gear reducer; according to tran***ission series can be divided into single and multi-stage gear reducer; according to the shape can be divided into cylindrical gear reducer，减速机工厂， bevel gear reducer and cone - cylindrical gear reducer; according to the arrangement the form of tran***ission can be divided into expansion，减速机采购， split and coaxial reducer.

在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours， the first oil change should be done. The quality of the oil should be checked regularly in later use， and the oil mixed with impurities or deterioration must be changed in time. In general， for a long-term continuous working reducer， new oil is replaced at 5000 hours or once a year.