设备安装厂家***团队在线服务“本信息长期有效”

切分刀粘钢是如何引起的？这一任务的完成不仅取决于生产过程的合理性，而且取决于时间和设备的充分利用程度。（1）切分孔型老化，切分孔出来的料在切分契尖处较厚，增加了切分刀的切分负荷；（2）切分道和孔型不对中，使切分刀不能顺利切开料型，引起粘钢；（3）切分处冷却水冷却效果不好，导致粘钢；（4）料型控制不好，或有条头和开花头现象，使切分刀不能顺利切开料型。

How does the slitting tool stick to the steel?

(1) the slitting hole is aging. The cutting hole is thicker at the cut point and the cutting load is thicker. (2) the cutting section and the pass are not in the middle, so that the cutting tool can not cut the material well and cause the sticky steel. (3) the cooling effect of the cooling water is not good, and (4) the of the material type is not good, or there is a strip head and the flower head phenomenon, so that the cutting knife can't go ***oothly. Cut the material type.

采用控制轧制工艺时，为了防止原始奥氏体晶粒过分长大，一般采用较低的加热温度和开轧温度。由于开轧温度高，变形后的奥氏体晶粒会发生再结晶而细化，如在这个阶段停止变第八节控制轧制技术形，轧件即随温度下降而产生相变。

In order to prevent the original austenite grain growing too much, the lower heating temperature and rolling temperature are generally adopted in the rolling process. Due to the high rolling temperature, the austenite grain after the deformation will be recrystallized and refined. For example, the eighth section rolling technology is stopped at this stage, and the phase change is produced as the temperature drops.

轧钢机在市场中的成长特别注重对自身品质的塑造。并且在市场中也需要品质轧钢机械来装饰，只有这样在能塑造出一个良性发展的市场环境，才能令自身在这样的良性发展的环境中成长的更加的快速。

The growth of rolling mills in the market pays special attention to the shaping of their own quality. And in the market also needs excellent quality steel rolling machinery to decorate, only in this way can create a benign development of the market environment, to make itself in such a benign development of the environment to grow more fast.