reducer厂家来电咨询「在线咨询」

齿轮减速机传动，耗能低，性能优越。摆线针轮减速机是一种采用摆线针齿啮合行星传动原理的传动机型，是一种理想的传动装置，具有许多优点，用途广泛，并可正反运转。

Gear reducer has high tran***ission efficiency, low energy cumption and superior performance. Cycloidal pinwheel reducer is a tran***ission type which adopts cycloid needle tooth meshing planetary tran***ission principle, and it is an ideal driving device. It has many advantages, widely used, and can run in reverse direction.

在输出轴上安装传动件时，不允许用锤子敲击，通常利用装配夹具和轴端的内螺纹，用螺栓将传动件压入，否则有可能造成减速机内部零件的损坏。

When driving parts are installed on the output shaft, it is not allowed to knock with hammers. Usually use assembly jig and inner thread of shaft end to press the tran***ission parts into bolts with bolts, otherwise, it may cause damage to internal parts of reducer.

减速机内部齿轮的齿距和压力角 小齿距能保证有较多的轮齿同时接触，齿轮重叠增多，减少单个齿轮挠曲，降低传动噪声，提高传动精度。较小的压力角由于齿轮接触角和横六角空心砖模具向重叠比都比较大，因此运转噪声小、精度高。

The tooth distance of the gear in the reducer and the ***all pitch of the pressure angle can ensure that there are more teeth at the same time, the overlap of the gear is increased, the deflection of the single gear is reduced, the tran***ission noise is reduced, and the tran***ission precision is improved. The ***aller pressure angle is due to the larger contact ratio between the gear contact angle and the six corners of the hollow brick mold, so the running noise is ***all and the accuracy is high.