推钢加热炉厂家优惠报价,圣霖国际开拓创新

以上是对加热炉的总的基本要求，在加热炉用于油气田具体环节时，需要注意工作介质和工作环境，以及提高生产率、提高加热质量和降低燃料消耗量等各项指标之间的关系，这些因素通常是统一的，但有时则有主有次。

The above is the basic requirement of the total heating furnace, for oil and gas fields in the following aspects: heating furnace, the need to pay attention to the working medium and working environment, and improve the productivity, improve heating quality and reduce fuel cumption relatihip between each index weight, these factors are usually unified, but sometimes there are times the lord.

按炉温分布，炉膛沿长度方向分为预热段、加热段和均热段。进料端炉温较低为预热段，其作用在于利用炉气热量，以提高炉子的热效率。加热段为主要供热段，炉气温度较高，以利于实现快速加热。

According to the distribution of furnace temperature, the furnace is divided into preheating section, heating section and uniform heating section along the length direction.

The lower temperature of the feed end is the preheating section, and its function is to increase the heat efficiency of the furnace by utilizing the heat of the furnace gas.

The heating section is the main heating section, and the furnace gas temperature is relatively high, which is conducive to rapid heating.

加热炉包括有连续加热炉和室式加热炉等。金属热处理用的加热炉另称为热处理炉。初轧前加热钢锭或使钢锭内部温度均匀的炉子称为均热炉。广义而言，加热炉也包括均热炉和热处理炉。

The heating furnace cists of a continuous heating furnace and a chamber heating furnace. The heating furnace for metal heat treatment is also called the heat treatment furnace. Before the blooming of heating steel ingots or the internal temperature of ingot uniform called pit. Broadly speaking, the heating furnace includes furnace and heat treatment furnace.

炉子的燃烧器采用的是自动点火器，并带火焰检测。站场用加热炉的能量消耗有10～15％消耗于炉子上，节省的燃料对降低单位成本和节约能源都有重要意义。在正常点火后，如果突然停电，安全装置电磁阀自动切断气路内燃气供应。此时必需重新开启电磁阀开关按钮，使燃气重新送入到炉子燃烧器内，但是我们在燃烧器上设计配套的电子打火并带火焰检测，只要气体进入到烧咀内电子打火器就会自动打火，点燃气体燃烧。

The burner of the furnace is an automatic igniter with flame detection. After normal ignition, if the power fails suddenly, the safety device solenoid valve automatically cuts off the gas supply in the gas path. At this time, the switch button of the solenoid valve must be reopened to re send the gas into the burner burner, but we design a matching electronic fire and fire detection on the burner. As long as the gas enters the burner, the electronic lighter will fire automatically and ignite the gas combustion.